DECONTAMINATION OF FACILITIES
Once an area is suspected of being contaminated already, the use of Oxine Chlorine Dioxide at much higher concentrations is required.
Decontamination Package
1. Fumigation (Protocol "FM") - this is very similar to our Fogging ("FG") protocol. However, much higher ClO2 gas concentration is used.
This protocol includes:
2. Spray Disinfection (Protocol "SD") - this protocol attacks areas/surfaces that have been contaminated with very high viral loads. This is the most common method of disinfection. Surfaces with high viral loads do not stand a chance with Oxine ClO2 liquid mist, and is neutralized within seconds. As there are areas that can not be fogged/fumigated (i.e. lobbies, corridors, open spaces), this protocol is more suited.
This protocol includes:
1. Fumigation (Protocol "FM") - this is very similar to our Fogging ("FG") protocol. However, much higher ClO2 gas concentration is used.
This protocol includes:
- Using Oxine CLO2 gas to fumigate the area at a much stronger concentration compared to fogging.
- Using Oxine ClO2 to disinfect Air Conditioning System (including ducts)
- Use of Cat. III PPEs
2. Spray Disinfection (Protocol "SD") - this protocol attacks areas/surfaces that have been contaminated with very high viral loads. This is the most common method of disinfection. Surfaces with high viral loads do not stand a chance with Oxine ClO2 liquid mist, and is neutralized within seconds. As there are areas that can not be fogged/fumigated (i.e. lobbies, corridors, open spaces), this protocol is more suited.
This protocol includes:
- Using Oxine CLO2 solution applied via mist spraying for hard surfaces, and high contact areas.
- Double backing on high contact areas and re-applyng disinfectant manually using spray-wipe method to ensure total decontamination.
